分类: 核科学技术 >> 核探测技术与核电子学 提交时间: 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要: A fully digital beam position monitoring system (DBPM) has been designed for SSRF (Shanghai Synchrotron Radiation Facility). As analog-to-digital converter (ADC) is a crucial part in the DBPM system, the sampling methods should be studied to achieve optimum performance. Different sampling modes were used and compared through tests. Long term variation among four sampling channels, which would introduce errors in beam position measurement, is studied, too. An interleaved distribution scheme was designed to address this issue. To evaluate the sampling methods, in-beam tests were conducted in SSRF. Test results indicate that with proper sampling methods, a turn-by-turn (TBT) position resolution better than 1 m is achieved, and the slow-acquisition (SA) position resolution is improved from 4.28 m to 0.17 m.
分类: 核科学技术 >> 核探测技术与核电子学 提交时间: 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要: Commercial off-the-shelf (COTS) ADCs (analog-to-digital converters) that are radiation-tolerant, high speed, high density and low power will be used in upgrading the LAr (liquid argon) calorimeter front end (FE) trigger readout electronics. Total ionization dose (TID) and single event effect (SEE) of the COTS ADCs should be characterized. In our initial TID test, 17 COTS ADCs from different manufacturers with dynamic range and sampling rate meeting requirements of the FE electronics were checked, and the ADS5272 of Texas Instruments (TI) was the best performer of all. Another interesting feature of ADS5272 is its 6.5 clock cycles latency, which is the shortest of all the 17 candidates. Based on the TID performance, we designed an SEE evaluation system for ADS5272, which allows us to further assess its radiation tolerance. In this paper, we present a detailed design of ADS5272 SEE evaluation system and show the effectiveness of this system while evaluating ADS5272 SEE characteristics in multiple irradiation tests. According to TID and SEE test results, ADS5272 was chosen to be implemented in the full-size LAr Trigger Digitizer Board (LTDB) demonstrator, which will be installed on ATLAS calorimeter during the 2014 Long Shutdown 1 (LS1).
分类: 核科学技术 >> 核探测技术与核电子学 提交时间: 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要: The Dark Matter Particle Explorer (DAMPE) is being constructed as a scientific satellite to observe high energy cosmic rays in space. As a crucial detector of DAMPE, the BGO calorimeter consists of 1848 PMT dynode signals which bring difficulties in front-end electronics on the space-limited and power-limited satellite platform. To overcome the challenge, a low-noise, low-power and high-integration ASIC chip, named VA32HDR14.2, is taken into account. In order to evaluate the radiation tolerance of the chip in space radiation environment, both single event effect (SEE) and total ionizing dose (TID) tests were performed. The SEE test result shows that the effective linear energy transfer (LET) threshold of single event latch-up (SEL) of the chip is around 23.0 MeV-cm2/mg, which is relatively sensitive, thus protection methods must be taken in the electronics design. The TID test result shows that the TID performance of the chip is higher than 25 Krad(Si), which satisfies the design specification.
分类: 核科学技术 >> 核探测技术与核电子学 提交时间: 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要: High precision time measurement is required in the readout of the neutron wall and TOF walls in the external target experiment of the Cooling Storage Ring (CSR) project in the Heavy Ion Research Facility in Lanzhou (HIRFL). Considering the time walk correction, both time and charge are measured in the readout electronics. In this 16-channel measurement module, time and charge information are digitized by TDCs at the same time based on the Time-Over-Threshold (TOT) method; meanwhile, by employing high-density ASIC chips, the electronics complexity is effectively reduced. Test results indicate that this module achieves a time resolution better than 25 ps and a charge resolution better than 5% over the input amplitude range from 50 mV to 3 V.
分类: 核科学技术 >> 核探测技术与核电子学 提交时间: 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要: This article presents a prototype of beam position and phase measurement (BPPM) electronics designed for the LINAC in China Accelerator Driven Sub-critical system (ADS). The signals received from the Beam Position Monitor (BPM) detectors are narrow pulses with a repetition frequency of 162.5 MHz and a dynamic range more than 40 dB. Based on the high-speed high-resolution Analog-to-Digital conversion technique, the input RF signals are directly converted to In-phase and Quadrature-phase (IQ) streams through under-sampling, which simplifies both the analog and digital processing circuits. All signal processing is integrated in one single FPGA, in which real-time beam position, phase and current can be obtained. A series of simulations and tests have been conducted to evaluate the performance. Initial test results indicate that this prototype achieves a phase resolution better than 0.1 degree and a position resolution better than 20 m over a 40 dB dynamic range with the bandwidth of 780 kHz, which is well beyond the application requirements.
分类: 核科学技术 >> 核探测技术与核电子学 提交时间: 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要: In this paper, a general method of data transmission system design on PXI platform is proposed. It can be used in readout system design for physical experiments. It aims at providing reusable and general interfaces for customized design of PXI while maintaining the transmission performance. It has three main features: (1)universal logic hardware interface, (2)ethernet based socket software interface, and (3)specific and simple data transmission protocol. Data transmission on PXI bus can be realized with the said two universal interfaces coordinated by this specific protocol. Test shows that this method is feasible and stable. This method can be easily reused in readout system designs for different experiments.
分类: 核科学技术 >> 核探测技术与核电子学 提交时间: 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要: In this paper, a high precision vernier delay line (VDL) TDC (Time-to-Digital Convertor) in an actel flash-based Field-Programmable-Gate-Arrays A3PE1500 is implemented, achieving a resolution of 16.4-ps root mean square value or 42-ps averaged bin size. The TDC has a dead time of about 200 ns while the dynamic range is 655.36 s. The double delay lines method is employed to cut the dead time in half to improve its performance. As the bin size of the TDC is dependent on temperature, a compensation algorithm is adopted as temperature drift correction, and the TDC shows satisfying performance in a temperature range from 5C to +55C.