分类： 核科学技术 >> 裂变堆工程技术 提交时间： 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要： The Chinese Academy of Science has launched a thorium-based molten-salt reactor (TMSR) research project with a mission to research and develop a fission energy system of the fourth generation. The TMSR project intends to construct a liquid fuel molten-salt reactor (TMSR-LF), which uses fluoride salt as both the fuel and coolant, and a solid fuel molten-salt reactor (TMSR-SF), which uses fluoride salt as coolant and TRISO fuel. An optimized 2 MWth TMSR-LF has been designed to solve major technological challenges in the Th-U fuel cycle. Preliminary conceptual shielding design has also been performed to develop bulk shielding. In this study, the radiation dose and temperature distribution of the shielding bulk due to the core were simulated and analyzed by performing Monte Carlo simulations and computational fluid dynamics (CFD) analysis. The MCNP calculated dose rate and neutron and gamma spectra indicate that the total dose rate due to the core at the external surface of the concrete wall was 1.91 Sv/h in the radial direction, 1.16 Sv/h above and 1.33 Sv/h below the bulk shielding. All the radiation dose rates due to the core were below the design criteria. Thermal analysis results show that the temperature at the outermost surface of the bulk shielding was 333.86 K, which was below the required limit value. The results indicate that the designed bulk shielding satisfies the radiation shielding requirements for the 2 MWth TMSR-LF.
分类： 核科学技术 >> 裂变堆工程技术 提交时间： 2023-06-18 合作期刊: 《Nuclear Science and Techniques》
摘要： In a molten salt reactor (MSR), the fuel is dissolved in fluoride salt. In this paper, the reactivity worth and reactivity initiated transient of Molten-Salt Reactor Experiment (MSRE) in the control rod failure events are analyzed. The point kinetic coupling heat-transfer model with decay character of six-group delayed neutron precursors due to the fuel motion is applied. The relative power and temperature transient under reactivity step and ramp initiated at different power levels are studied. The results show that the reactor power and temperature increase to a maximum, where they begin to decrease to stable values. Comparing with full power level, the transient result at low power level is more serious. The results are of help in our study on safety characteristics of an MSR system.
点击量
通过
点击量
下载量
评论
