Passive Neutron Multiplicity Device for 240Pu Measurement Based on FPGA

分类： 物理学 >> 核物理学 提交时间： 2024-05-17

Yan Zhang Hao-Ran Zhang Ren-Bo Wang Ming-Yu Li Rui Chen Hai-Tao Wang Xiang-Ting Meng Shu-Min Zhou Bin Tang

摘要： A passive neutron multiplicity measurement device, FH-NCM/S1, based on field-programmable gate arrays(FPGAs), is developed specifically for measuring the mass of plutonium-240 (240Pu) in mixed oxide fuel. FHNCM/S1 adopts an integrated approach, combining the shift-register analysis mode with the pulse-positiontimestamp mode using an FPGA. The optimal effective length of the 3He neutron detector was determined tobe 30 cm, and the thickness of the graphite reflector was ascertained to be 15 cm through MCNP simulations.After fabricating the device, calibration measurements were performed using a 252Cf neutron source; a detectionefficiency of 43.07% and detector die-away time of 55.79 μs were observed. Nine samples of plutoniumoxide were measured under identical conditions using the FH-NCM/S1 in shift-register analysis mode and aplutonium-waste multiplicity counter. The obtained double rates underwent corrections for detection efficiency(ε) and double gate fraction (f d), resulting in corrected double rates (Dc), which were used to validate the accuracyof the shift-register analysis mode. Furthermore, the device exhibited fluctuations in the measurementresults, and within a single 20-s measurement, these fluctuations remained below 10%. After 30 cycles, therelative error in the mass of 240Pu was less than 5%. Finally, correlation calculations confirmed the robustconsistency of both measurement modes. This study holds specific significance for the subsequent design anddevelopment of neutron multiplicity devices.

通过

 点击量 445  下载量 203  评论