注册 登录
EN | CN
  • 首页
  • 论文提交
  • 论文浏览
  • 论文检索
  • 个人中心
  • 帮助
按提交时间
  • 3
按主题分类
  • 2
  • 1
按作者
  • 3
  • 3
  • 3
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
按机构
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
当前资源共 3条
隐藏摘要 点击量 时间 下载量
  • 1. ChinaXiv:202405.00132
    下载全文

    In-process detection of cutting forces and cutting temperature signals in cryogenic assisted turning of titanium alloys: An analytical approach and experimental study

    分类: 机械工程 >> 机床技术 提交时间: 2024-05-14

    Munish Kumar Gupta Mehmet Erdi Korkmaz Murat Sarikaya Grzegorz M. Krolczyk Mustafa Gunay

    摘要: In-process detection of cutting forces, temperature, roughness, wear etc. during machining of titanium alloys are very important. The Finite element (FE) analysis plays an important role in monitoring and detection of machining responses. It offers a high accuracy in modeling of dry cutting processes and its performance in modeling of cryogenic machining process is a matter of interest. In this context, current investigation focuses on the dry turning and LN2/CO2cooling assisted turning process of commonly used Ti6Al4V alloy. It is very useful material in the biomedical sector, and the simulation of cutting forces and cutting temperature via finite element method (FEM) has been performed. In addition, the simulation results are validated with experimental work. The results show that the deviations between FE modeling and experimental results for the cutting temperature are the average of 5.54%, 5.18% and 8.42% for the dry, LN2and CO2cooling conditions, respectively. On the other hand, the deviations from FE modeling and cutting force test results were 3.74%, 3.358%, and 3.03% under dry, LN2and CO2cooling conditions, respectively.

    通过
     点击量 2239  下载量 652  评论 0
  • 2. ChinaXiv:202405.00066
    下载全文

    Measurement and analysis of machining induced tribological characteristics in dual jet minimum quantity lubrication assisted turning of duplex stainless steel

    分类: 机械工程 >> 机械制造工艺与设备 提交时间: 2024-05-10

    Munish Kumar Gupta Mehmet Boy Mehmet Erdi Korkmaz Nafiz Yas¸ar Mustafa Günay Grzegorz M. Krolczyk

    摘要: In this work, the sustainable machining approach is promoted by implementing the dry and minimum quantity lubrication (MQL) cooling conditions in the turning of duplex stainless steel. Initially, the turning experiments were performed under dry as well as MQL conditions and then, the influence of different positions of MQL nozzles on tribological and machining performance of 2205 duplex steel was investigated. The cutting parameters were kept fixed and the performance is evaluated in terms of surface roughness, micro-hardness, energy consumption, tool wear, machined surface microstructure and chips morphology. The results demonstrated that the highest average surface roughness values were obtained under dry conditions, with a value of 2.20 μm while MQL (flank + rake directions) produces the lowest surface roughness value of 1.55 μm with an improvement of 30%. Moreover, dual-jet MQL gives the lowest energy consumption (229 kJ) and tool wear (0.15 mm) with 23.67% and 52.38% enhancement, respectively.

    通过
     点击量 2155  下载量 705  评论 0
  • 3. ChinaXiv:202405.00080
    下载全文

    Tribological and surface morphological characteristics of titanium alloys: a review

    分类: 机械工程 >> 机械制造工艺与设备 提交时间: 2024-05-12

    Munish Kumar Gupta Hamza El Etri Mehmet Erdi Korkmaz Nimel Sworna Ross Grzegorz M. Krolczyk Józef Gawlik Nafiz Yaşar Danil Yu Pimenov

    摘要: Being easily fabricated, welded, biocompatible, having a high strength-to-weight ratio, withstanding comparatively high temperatures up to 800 °C and low modulus of elasticity make grade titanium and its alloys an important choice for automotive, biomedical and aerospace industries. In contempt of the different pleasant assets of Ti–6Al–4V alloy, the operation of this alloy is restricted especially when it comes to tribological and surface morphological characteristics. Enhancing these properties is important, for this purpose, a diversity of attempts and studies have been conducted. This paper mounts a review of morphological and tribological behaviors of titanium alloys including Ti–6Al–4V against different materials counting with carbide tools and other types of materials under dry and lubricated sliding conditions. The surface morphological, wear, and other properties have been discussed in this review article.

    通过
     点击量 2203  下载量 622  评论 0
友情链接 : PubScholar 哲学社会科学预印本
  • 运营单位: 中国科学院文献情报中心
  • 制作维护:中国科学院文献情报中心知识系统部
  • 邮箱: eprint@mail.las.ac.cn
  • 地址:北京中关村北四环西路33号
招募预印本评审专家 许可声明 法律声明

京ICP备05002861号-25 | 京公网安备110402500046号
版权所有© 2016 中国科学院文献情报中心